If you just want to take advantage of all the features of our panel remember our panel works with just about every sensor on the market today.

24v to 12v Convertors available

The is the start up screen for the version 2.0.  When you push the up or down arrow you will

get the screen below. 

New Legacy 6.0 & 7.0  Version 2.0

Same size as regular Legacy panels but has new firmware

Default Screen above.  When you want to detail your tanks

just push the up or down arrow to see the screen below.

Version 2.0 is available in Larger Profile Panel and Legacy 6.0 & 7.0 sizes

                   We can upgrade your Profile or Legacy Panels

                                         Call for Details

      1-8 tank Profile Water, Waste, Gasoline & Diesel

                                    PANEL ONLY

                                 Panel size 6.5" H X 5.0" W

                      Cut out size 5 3/4" H X 4 1/4" W

          The is the start up screen for the Legacy panel.

        1-8 tank Profile Series, Legacy Model Water, Waste,

                                     Gasoline & Diesel

                                         PANEL ONLY

                            Two sizes to choose from

                                     Panel Size 6.0" W X 3.8" H

                              Panel Size 7.0" W X 3.8" H

                           Cut out size  5 1/8" W X 3 1/8" H

                              Custom panel sizes available

1 Tank Solo Panel with one sensor kit

Water & Waste only with supplied sensor kit

             Panel size 2.0" H X 3.5" W

        Cut out size  1.5" H X 2.5/8" W

1 Tank Solo Panel for Waste tank with

         Full alert and one sensor kit

Water & Waste only with supplied sensor kit

            Panel size 2.0" H X 3.5" W

         Cut out size  1.5" H X 2.5/8" W

PVC Rod for Metal Tanks.  View of 1" pipe thread fitting.  Bottom end is sealed

or can be shipped open ended and you cut and seal with simple instructions.

Reading is through the PVC pipe.  This is a non fouling rod in waste tanks.

For customers without access to the top of their tank we also build this sensor with a 90 bend (sensor head pictured above at right) to mount through a hole in the side wall of your tank. This sensor variant is built with one of our SAE-5 to 1" NPT adapters attached and requires the SAE-5 hole sensor mounting pattern be present on your tank.

Basic Features:

• Monitors fresh water or waste tanks.
• Sensor lengths in excess of 48".
• Installs in a 1" NPT threaded hole in the top of the tank.
• SAE-5 to 1" NPT adapter available for mounting.
• Sensor also available with a 90 bend for mounting through a tank side wall.
• Power-on light for troubleshooting.
• No moving parts to foul.

Call for pricing, varies on exact size in and down

Our new 8 tank monitoring system for Boats & RV's is the most modern panel on the market.  It features our new EZ-Profile software that greatly improves the linearity and accuracy of the displayed tank level.  We have also designed a state of the art non-contact sensor, which mount on the outside of plastic or fiberglass tanks.

This panel is great for the do-it-yourselfer as all panel functions can be quickly setup via a series of easy to follow menus.  Electrical connections are also a snap as they are made on a series of screw down terminals located on the back of the panel.

OEM customers will also appreciate our OEM setup menu option in which we pre-program a variety of tank configurations that can be selected from at install time.  This way our OEM customer can purchase one panel part number for all models they produce instead of many different pre-programmed panels.

Key Features:

1.       From 1 to 8 fluid tanks can be monitored autonomously

2.       Basic cross-sectional shape of each tank can be set to improve the linearity of tank readings

3.       Panel is compatible with non-contact sensors as well as 240-33 Ohm float-style sensors

4.       0-90 Ohm LP tank sender output can be displayed

5.       4x20 text LCD display with backlighting

6.       New panel is fully user configurable

Hardware Features:

1.       4x20 text LCD display with automatic backlighting (back light enabled at night via a light sensor)

2.       Red warning light indicates a tank out-of-bounds condition

3.       Audible alarm warns of a tank out-of-bounds (audible alarm disabled at night via a light sensor)

4.       Rocker switch provided for on/off control

5.       Green power-on LED

6.       All electrical connections made on screw-down terminal strips on the back of the panel making electrical connections simple to make

          (and re-make) should a mistake in wiring be made during installation)

7.       Overall panel size: 6.5" x 5", 3.8" x 6.0 and other sizes are available in our 1-8 tank.

Software Features:

1.       Users can fully configure the panel through a series of on-screen menus:

a.       The number of sensor channels to be monitored (from 1 to 8)

b.       The name for each monitored sensor channel (i.e.: FORWARD FRESH, PORT WASTE, etc...)

c.       Type of sensor attached to each sensor channel (non-contact sensors, or 240-33 Ohm float style sensors)

d.       Alarm-on-empty or alarm-on-full can be set for each channel

e.       Time interval for autonomous sensor reading

f.        Basic cross-sectional shape of each tank can be set to improve the linearity of tank readings

2.       Panel autonomously monitors each connected sensor channel:

a.       Red warning light is lit continuously when any channel which is out of bounds (a fresh or fuel tank is too low, or a waste tank is too full)

b.      Audible alarm sounds when all channels are updated (time interval for update set by user) to alert the user  that that  something  amiss except at night when the audible alarm is suppressed by a light sensor

c.       "HI," "LO," or "OK" tank status is indicated with the 10 position bar graph on the LCD display